- Delivery 48h
- Secure payments
- ISO 9001 Certification
Waterbased, one component, unbeaded traffic paint of the A2 type, based on pure acrylic resin and titanium dioxide.
Calculate here the amount of paint needed for your project
Description of the product
Fast drying A2 type traffic paint for road markings, especially suited for outdoor lines and crosswalks in populated or rural areas
Single component water-based traffic paint based on pure acrylic resins for outdoor use only.
RD-Aquaroad is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in densely populated or rural areas.
RD-Aquaroad is UV resistant and has very good resistance against wear and abrasion.
RD-Aquaroad is part of the SCS – Single Coating System - product group.
Concrete – asphalt
On new asphalt
Wet film thickness in microns / mils
Dry film thickness in microns / mils
Consumption per m² / ft² per gallon
100 / 4
60 / 2,5
0,15 Kg / 400
400 / 16
240 / 10
0,6 Kg / 100
300 / 12,5
0,6 Kg / 100
It is possible to apply beads in the paint at a rate of 300 g/m²
Apply 300 g/m² of Aquaroad and sprinkle the beads gradually at a coverage of 300 g/m². Then apply again 300 g/m² of Aquaroad.
Apply 300 g/m² of Aquaroad and sprinkle the beads gradually at coverage of 300 g/m². Then apply again 300 g/m² of Aquaroad and sprinkle again the beads at coverage of 300 g/m².
A single coat is possible on previously painted surfaces in need of an aesthetic refreshment.
Ambient temperature: minimum 10° C (50°F)
Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 85 %
Brush or airless (nozzle size: 019–025)
PREPARATION OF THE SUBSTRATE:
The substrate must be clean: dry, degreased and dust free. Non adhering elements such as older coatings must be removed.
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 30 minutes
CLEANING OF TOOLS:
Mix well before use.
FINISH (Gardner 60°):
Mat 5 % +/- 5
White, Yellow, Black, Red, Orange, Green, Blue
1.55 +/- 0.05 g/cm³
In weight: 75 % +/-2 (white)
In volume: 61 % +/-2 (white)
90 KU (Krebs)
< 55 g/L
24 months, keep away from frost and store away from heat.
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.