Home 
RD-AquaFinish 96
High performance RAL 9006 metallic effect finish lacquer for interior and exterior application.
Useful for the renovation of claddings, garage doors, equipment, furniture etc., RD-AquaFinish is applied as a finish on our anti-corrosion products, or directly on the surface in some cases.
From €53.92 VAT incl.
Calculate here the amount of paint needed for your project
Description of the product
USE:
High performance interior and exterior metallic effect enamel with superior properties.
FEATURES:
RD-Aquafinish 96 is a single-component topcoat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant white aluminium film effect that can be used for decorative and protective purposes.
RD-Aquafinish 96 is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Aquafinish 96 creates a nice and smooth finish. Thanks to its high-quality aluminium pigments, it offers very good resistance to humidity and has a very good outdoor durability.
SUBSTRATES:
Various surfaces like plastics, concrete, cement, wood, metal, when primed accordingly.
Systems
Ferrous metals | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Monoguard | 200 / 8 | 85 / 3,4 | 0,20 L / 200 |
Finish | RD-Aquafinish 96 | 100 / 4 | 30 / 1,2 | 0,10 L / 400 |
TOTAL | 115 / 4,6 | |||
Non-ferrous metals – (stainless steel, aluminium, …), plastics, wood | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Multiprim | 100 / 4 | 40 / 1,6 | 0,10 L / 400 |
Finish | RD-Aquafinish 96 | 100 / 4 | 30 / 1,2 | 0,10 L / 400 |
TOTAL | 70 / 2,8 | |||
Choose a RAL 7040 for the color of the primer for better performance.
If the surface will be subject to chemical spills, high wear, or abrasion, apply one or two coats of RD-Hydrograff HP Clear as finish.
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
Brush, roller or low pressure pneumatic spray gun.
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the kind of substrate. In general, the surface must first be coated with a primer, clean and degreased prior to applying RD-Aquafinish 96.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Satin: 40 +/- 5
COLOURS:
RAL 9006. White aluminum
DENSITY:
1.05 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 32 % +/-2
In volume: 29 % +/-2
VISCOSITY:
60 - 80 P (Brookfield 20RPM)
VOC CONTENT:
< 130 g/L
FLASH POINT:
Not flammable
STORAGE:
24 months, keep away from frost and store away from heat.
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
High performance RAL 9006 metallic effect finish lacquer for interior and exterior application.