• Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • ISO 9001 Certification ISO 9001 Certification

    Acryl W

    Technical sheet

    High-quality water-based sealant based on acrylic dispersion.

    From €10.33 VAT incl.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 u.
    €10.33 VAT incl.
    Price per Pce: €10.33 VAT incl.
    1 box (12 u.)
    €117.81 VAT incl.
    Price per Pce: €117.81 VAT incl.
    Total VAT incl. : 0
    Total quantity selected (Pce): 0
    Average price VAT incl. per Pce: 0

    Technical sheet

    Description of the product

    USE: 

    High-quality water-based sealant based on acrylic dispersion. 

    FEATURES:

    After application, the product cures to a soft plasto-elastic rubber due to the evaporation of the water from the sealant. It is paintable with water-based and synthetic paints and is not corrosive towards metals. 

    RD-Acryl W is water-based, easy to handle, safe and has no fire risks. 

    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings. 

    RD-Acryl W has perfect adhesion without use of a primer on most, even slightly damp, substrates. It was specifically developed for sealing connection joints between stairs, walls, ceilings, skirtings, windowsills, wooden and metal window frames, concrete, and brickwork.

    SUBSTRATES:

    Various plastics, plaster, concrete, cement, wood, metals, coated surfaces, …
    Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates.

    Application instructions

    APPLICATION CONDITIONS:

    Application temperature +5°C to +40°C / 41°F to 104°F (applies to environment and substrates). 

    PREPARATION OF THE SUBSTRATE:

    All substrates must be solid, clean, dry, and free of grease and dust. Substrates to be cleared of all loose particles, absorbent substrates do not need to be absolutely dry.

    Very porous substrates like: gypsum, airated concrete, limestone, etc, need to be primed with a mixture of 1 part Acryl-W and 2 parts water.

    Always test adhesion prior to application. Finish and smooth with water.

    APPLICATION MEANS:

    A joint with the correct dimensions can absorb movements between building materials. The joint depth should always be in the correct relationship of the joint width. 

    A general rule is the ratio of joint depth to the width of the joint with a joint width up to 10 mm - 3/8 inches is 1:1, with a minimum of 5 mm – ¼ inch in width and depth. For joints wider than 10 mm - 3/8 inches, the depth is the width divided by 3 plus 6 mm – ¼ inch.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Skin formation: 7 minutes
    On touch: 15 minutes
    Recoatable: 24 hours or when fully dry.

    CLEANING OF TOOLS:

    Water

    Technical data

    FINISH (Gardner 60°):

    Satin

    COLOURS:

    White

    DENSITY:

    1.71 +/- 0.05 g/cm³

    VOC CONTENT:

    < 50 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    18 months: keep away from heat and frost
    Frost resistance during transportation up to -15°C

    Norms and tests

    100 % modulus DIN 53504 S2

    0,40 N/mm²

    Elongation at break

    240%

    Flow ISO 7390

    < 2mm

    Joint movement

    12,5%

    Shore a hardness DIN 53505/ ISO 868

    30

    Temperature resistance

    -20°C to +75°C

    Tensile strength DIN 53504

    0,40 N/mm²

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.