search
    • Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • ISO 9001 Certification ISO 9001 Certification

    RD-Hydrograff HP Clear Satin

    Highly resistant satin varnish specially formulated for the long-term protection of surfaces against wear, abrasion, chemical spills, and weathering.

    RD-Hydrograff HP is THE solution to protect surfaces that are subject to severe strains. Whether it is a floor, industrial equipment, furniture, etc. RD-Hydrograff HP has unmatched performance. For indoors or outdoors! This varnish can be applied directly on most kinds of paint and sometimes directly to the surface.

    From €46.80 VAT incl.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    €46.80 VAT incl.
    Price per L: €46.80 VAT incl.
    2,5 l
    €106.90 VAT incl.
    Price per L: €42.76 VAT incl.
    5 l
    €193.60 VAT incl.
    Price per L: €38.72 VAT incl.
    Total VAT incl. : 0
    Total quantity selected (L): 0
    Average price VAT incl. per L: 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Description of the product

    USE: 

    Highly resistant varnish specially formulated for the long-term protection of surfaces against wear, abrasion, chemical spills, and weathering.

    FEATURES:

    RD-Hydrograff HP Clear is a two-component aliphatic polyurethane topcoat for indoor and outdoor use.  After drying, the coating creates a hard flexible and wear resistant film that can be used for decorative and protective purposes. It is appropriate for application on concrete and wooden floors or objects, walls, steel and non-ferrous metals with a primer, etc. It provides very good resistance against humidity and very good outdoor durability.

    RD-Hydrograff HP Clear is water-based, easy to handle and has no fire risks. 

    RD-Hydrograff HP Clear is formulated with high quality raw materials and provides a very good chemical resistance, a very good resistance against abrasion and solvents, a very high hardness (Taber abrasion: weight loss after 1000 cycles /CS 10 = 0.060 g); while keeping  flexibility in its film that will avoid future cracks.

    RD-Hydrograff HP Clear can provide very high levels of anti-corrosion protection surpassing traditional three coat systems when combined with RD-Monoguard! 

    It is also used as transparent anti-corrosion system when combined with RD-Monoguard Clear.

    RD-Hydrograff Clear High Gloss can be used as an anti-graffiti protection on top of various kind of surfaces. 

    SUBSTRATES:

    Various surfaces like plastics, concrete, cement, wood, metal, when primed accordingly.

    Systems

    Floors: concrete, cement, wooden

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Hydrograff HP Clear

    150 / 6

    60 / 2,4

    0,15 L / 270

    1st layer diluted with 10% water if the surface is porous.

    Finish

    RD-Hydrograff HP Clear

    150 / 6

    60 / 2,4

    0,15 L / 270

    TOTAL

     

    120 / 4,8

    0,30 L / 135

    If the surface will be subject to chemical spills, high wear, or abrasion, apply one or two coats of RD-Hydrograff HP Clear as finish.

    Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

    Objects, structures in ferrous metal:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Monoguard

    200 / 8

    85 / 3,4

    0,20 L / 200

    Coverage depends on colour contrast. An extra coat may be required

    Finish

    RD-Hydrograff HP Clear

    100 / 4

    40 / 1,6

    0,10 L / 407

    TOTAL

     

    125 / 5

     

     

    Objects in non-ferrous metal – (stainless steel, aluminium, …), plastic:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Multiprim

    100 / 4

    40 / 1,6

    0,10 L / 400

    Coverage depends on colour contrast. An extra coat may be required

    Finish

    RD-Hydrograff HP Clear

    100 / 4

    40 / 1,6

    0,10 L / 407

    TOTAL

     

    80 / 3,2

     

     

    Walls, objects and equipment made of wood, concrete, hard plastic:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Hydrograff HP Clear

    100 / 4

    40 / 1,6

    0,10 L / 407

     

    Finish

    RD-Hydrograff HP Clear

    100 / 4

    40 / 1,6

    0,10 L / 407

    TOTAL

     

    80 / 3,2

    0,20 L / 200

    Indicated consumption is based on RD-Hydrograff HP Clear High Gloss version and is theoretical, it does not consider potential losses during application. It can also be influenced by the porosity of the substrate. This consumption may not be exceeded. An excessive consumption can cause formation of gas bubbles in the paint film.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
    Relative humidity: maximum 80 %
    Dew point > 3°C (5°F)
    Screeds may not contain more than 4% of humidity.

    APPLICATION MEANS:

    Brush and roller.
    Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
    Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)

    PREPARATION OF THE SUBSTRATE:

    Preparation will depend on the kind of substrate. In general, the surface must be cleaned and degreased prior to applying RD-Hydrograff HP Clear.

    MIXING RATIO:

    Just before the application, add slowly component B into component A by mixing mechanically.

    After mixing, let it rest during 5 to 10 minutes so that the air bubbles disappear. The mixture must be used within 2 hours.

    Weight:     170 g of component B for 850 g of component A

    Volume:    5,5 : 1

    POT-LIFE:

    2 hours at 20°C

    DILUTION:

    Dilute the first coat by maximum 10% with water when applied as primer on a porous substrate.

    DRYING TIME (20°C - 68°F):

    Touch dry: 6 hours
    Recoatable: min. 8 hours and maximum 72h without sanding
    Resistance to moderate use: 3 days
    Resistance to intensive use: 7 days

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    Satin:            35 % +/- 5

    COLOURS:

    Transparent.

    DENSITY:

    1.02 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  43 % +/-2
    In volume: 41 % +/-2

    VISCOSITY:

    15 - 25 P (Brookfield 20RPM)

    VOC CONTENT:

    < 20 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms and tests

    ABRASION RESISTANCE TABER

    ASTM D4060

    OVERALL MIGRATION

    EN 1186

    QUV

    ASTM D4587 / ASTM G53 /ISO11507

    CORROSION

    ASTM B117 / ISO 9227

    PENCIL HARDNESS

    ISO 15184

    PERSOZ HARDNESS

    ISO 1522

    CHEMICAL RESISTANCE

    INTERNAL TESTS

    ADHERENCE CROSS CUT

    ISO 2409

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.