• Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • Technical & commercial support Technical & commercial support

    RD-Aquatop PU Satin

    Technical sheet

    High-performance, one-component, quick-drying, satin-gloss finish lacquer for interior and exterior application.

    RD-Aquatop PU can be applied directly on many substrates, or as a finish on our anti-corrosion systems when a greater variety of effects (gloss) and high aestetics is required.RD-Aquatop PU has good resistance to UVs, weathering and abrasion.

    From €39.75 VAT incl.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    €39.75 VAT incl.
    Price per L: €39.75 VAT incl., surface 1 coat: 10.00m²
    2.5 L
    €96.23 VAT incl.
    Price per L: €38.49 VAT incl., surface 1 coat: 25.00m²
    5 l
    €178.23 VAT incl.
    Price per L: €35.65 VAT incl., surface 1 coat: 50.00m²
    10 l
    €336.26 VAT incl.
    Price per L: €33.63 VAT incl., surface 1 coat: 100.00m²
    Total VAT incl. : 0
    Total quantity selected (L): 0
    Average price VAT incl. per L: 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    High performance interior and exterior enamel with superior properties. 

    FEATURES:

    RD-Aquatop PU is a single-component top coat based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes. 

    RD-Aquatop PU is water-based, easy to handle, safe and has no fire risks.
    It is a fast-drying coating system that greatly reduces downtime during installation.
    Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
    RD-Aquatop PU creates a nice and smooth finish. Thanks to its high-quality pigments, it offers very good resistance to humidity and has a very good outdoor durability. 

    RD-Aquatop PU has successfully been tested to be used for constructions regulated by the LIVING BUILDING CHALLENGE – LEED.

    SUBSTRATES:

    Various plastics, concrete, cement, wood, metal (with primer), coated surfaces, …

    Systems

    Ferrous metals

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Monoguard

    200 / 8

    85 / 3,4

    0,20 L / 200

    Coverage depends on colour contrast. An extra coat may be required

    Finish

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    TOTAL

     

    125 / 5

     

    Non-ferrous metals – (stainless steel, aluminium, …), plastics:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Multiprim

    100 / 4

    40 / 1,6

    0,10 L / 400

    Coverage depends on colour contrast. An extra coat may be required

    Finish

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    TOTAL

     

    80 / 3,2

     

    Wood, concrete, hard plastics:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

     

    Finish

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    TOTAL

     

    80 / 3,2

    0,20 L / 200

    Tannic and exotic woods

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    Deco Isomat Aqua

    125 / 5

    60 / 2.4

    0,13 L / 325

    2nd layer

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    Finish

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    TOTAL

     

    140 / 5.6

    Pre-painted elements like doors, plinths,…:

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer/Finish

    RD-Aquatop PU

    100 / 4

    40 / 1,6

    0,10 L / 400

    Coverage depends on colour contrast. An extra coat may be required

    Aesthetical fresh-up:

    A single coat is possible on previously painted surfaces in need of an aesthetic refreshment. Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
    Relative humidity: maximum 80 %
    Surface temperature must be minimum 3°C (5°F) above dew point.

    APPLICATION MEANS:

    Brush, roller or spray gun.
    Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
    Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)

    PREPARATION OF THE SUBSTRATE:

    Preparation will depend on the type of substrate. In general, the surface should be clean and degreased before applying RD-Aquatop PU.

    On tannic or exotic woods, we recommend using RD-Deco Isomat Aqua as a first coat to prevent tannin migration through the paint film.

    DILUTION:

    Product is ready-for-use.

    DRYING TIME (20°C - 68°F):

    Touch dry: +/- 1h30 hours
    Dry: +/- 2 hours
    Recoatable: +/- 4 hours

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    Satin:      35 +/- 5

    COLOURS:

    Stock colours: White.
    RAL, NCS and bespoke colours.
    Available on RD Coatings dispensing system.

    DENSITY:

    1.2 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight:  47 % +/-2
    In volume: 39 % +/-2

    VISCOSITY:

    20 - 30 P (Brookfield 20RPM)

    VOC CONTENT:

    < 50 g/L

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms and tests

    RED LIST COMPLIANCE

    Living Building Challenge v3

    VOC EMISSION TEST RESULTS

    California Department of Public Health CDPH/EHLB/Standard

    Method Version 1.2, 2017

    TVOC CONCENTRATION RANGE

    USGBC’s LEED v4 rating systems

    USGBC LEED Version 4, BD&C, ID&C

     

    The WELL Building Standard

     

    ANSI/GBI 01, Green Building Assessment Protocol

     

    ISO 16000-6 / COV classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS. S050/230215