

Waterborne onecomponent acrylic paint for roofs. The film has a decorative aluminium look.
The film is waterproof and very elastic - Very good adherence.
Suits to asbestos-cement roofs, shingles, roofing …
• Primer: 1 impregnation coat of RD-UNIFIX
• Top coat: 1 or 2 coats of RD-ELASTOROOF ALU or 1 coat of RD-ELASTODECK and, after that, 1 coat of RD-ELASTOROOF ALU.
• Primer: 1 coat of RD-ELASTOMETAL
• Topcoat: 1 coat of RD-ELASTOROOF ALU.
Bituminous substrates older than 1 year can be directly recovered with 1 or 2 coats of RD-ELASTOROOF ALU or 1 coat of RD-ELASTODECK and, after that, 1 coat of RD-ELASTOROOF ALU.
On flat roofs it is recommended to use a mesh RD-ROOF FLEECE.
From 0.5 L/m² (paint system) to 2 L/m² (waterproof system)
Outdoor: never apply if raining
Ambient temperature: > 5° C
R.H.: max. 80 %
Never apply under heavy sun
Brush or roller
The substrate has to be dry, degreased, brushed and the moss has to be removed.
WARNING: On any kind of substrate the room underneath should be equipped with a vapour barrier and sufficient roof ventilations in order to avoid the formation of condensation under the roof. The slope to the drain-pipes should be large enough to fully collect the rain.
Product is ready-for-use.
Touch dry: +/- 3 hours
Recoatable: +/- 24 hours
Water
Mix well before use.
High gloss
Aluminum
1.02 +/- 0.05 g/cm³
In weight: 52 % +/-2
In volume: 49 % +/-2
100 - 125 P (Brookfield 20RPM)
< 90 g/L
Not flammable
24 months, keep away from frost and store away from heat.
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
Waterborne onecomponent acrylic paint for roofs. The film has a decorative aluminium look.