• Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • Technical & commercial support Technical & commercial support

    RD-Hydrograff HP Satin

    Technical sheet

    Highly resistant satin coating specially formulated for the long-term protection of surfaces against wear, abrasion, chemical spills, and weathering.

    RD-Hydrograff HP is THE solution to protect surfaces that are subject to severe strains. Whether it is a floor, industrial equipment, furniture, etc. RD-Hydrograff HP has unmatched performance. For indoors or outdoors!

    Since 24/08/2023, an on-line training is required for professional users prior to using this product. The terms are to be found in the technical datasheet under “Safety Data” 

    From €64.75 VAT incl.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    1 l
    €64.75 VAT incl.
    Price per L: €64.75 VAT incl., surface 1 coat: 10.00m²
    2.5 L
    €151.31 VAT incl.
    Price per L: €60.52 VAT incl., surface 1 coat: 25.00m²
    5 l
    €283.14 VAT incl.
    Price per L: €56.63 VAT incl., surface 1 coat: 50.00m²
    Total VAT incl. : 0
    Total quantity selected (L): 0
    Average price VAT incl. per L: 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE: 

    Highly resistant coating specially formulated for the long-term protection of surfaces against wear, abrasion, chemical spills, and weathering.

    FEATURES:

    RD-Hydrograff HP is a two-component aliphatic polyurethane topcoat for indoor and outdoor use.  After drying, the coating creates a hard flexible and wear resistant film that can be used for decorative and protective purposes. It is appropriate for application on various kind of surfaces including concrete and wooden floors, walls, equipment, etc. It provides very good resistance against humidity and very good outdoor durability.

    RD-Hydrograff HP is water-based, easy to handle and has no fire risks. 

    RD-Hydrograff HP is formulated with high quality raw materials and pigments. It provides high UV resistance, a very good chemical resistance including gasoline, a very good resistance against abrasion and solvents, a very high hardness (Taber abrasion: weight loss after 1000 cycles /CS 10 = 0.060 g); while keeping  flexibility in its film that will avoid future cracks.

    It is a good solution to coat indoor or outdoor parking spaces with different colours.

    RD-Hydrograff HP can provide very high levels of anti-corrosion protection surpassing traditional three coat systems when combined with RD-Monoguard! 

    SUBSTRATES:

    Concrete, wood, various plastics, painted surfaces, steel et non-ferrous metals (with proper primer), …

    Systems

    Floors: concrete, cement, weathered asphalt

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Hydrograff HP

    167 / 6,7

    80 / 3,2

    0,17 l / 244

    1st layer diluted with 10% water if the surface is porous.

    Finish

    RD-Hydrograff HP

    167 / 6,7

    80 / 3,2

    0,17 l / 244

    TOTAL

     

    160 / 6,4

    0,34 l / 244

    Equipment made of ferrous metals (anti-corrosion system)

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Monoguard

    200 / 8

    85 / 3,4

    0,20 l / 200

    Finish

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    TOTAL

     

    125 / 5

     

    Equipment made of non-ferrous metals (stainless steel, aluminium, …), plastics

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Primer

    RD-Multiprim

    100 / 4

    40 / 1,6

    0,10 l / 400

    Finish

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    TOTAL

     

    80 / 3,2

     



    Tannic and exotic woods

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    Deco Isomat Aqua

    125 / 5

    60 / 2.4

    0,13 l / 325

    In some cases, depending on the needs, one coat may be enough.

    2nd layer

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    Finish

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    TOTAL

     

    140 / 5.6

    Objects and walls: wood, concrete, cement, hard plastics…

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Primer

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    In some cases, depending on the needs, one coat may be enough.

    Finish

    RD-Hydrograff HP

    83 / 3,3

    40 / 1,6

    0,08 l / 488

    TOTAL

     

    80 / 3,2

    0,16 l / 244

    Anti-skid system on floors:

    1/ Broadcast sand or quartz (silicic sand 99% purity 0,3-1mm) on the freshly painted first coat of RD-Hydrograff HP. Broadcast until rejection or lightly depending on the required roughness.
    2/ Wait at least two hours until the coating is dry.
    3/ Brush off the non-adhering sand.
    4/ Apply the second coat of RD-Hydrograff HP.

    Already painted surfaces, aesthetical fresh-up:

    Depending on the colour, apply one or two coats of RD-Hydrograff HP.

    Indicated consumption is based on RD-Hydrograff HP Glossy version and is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate. This consumption may not be exceeded. An excessive consumption can cause formation of gas bubbles in the paint film.

    Application instructions

    APPLICATION CONDITIONS:

    Ventilate properly if painting inside.
    Ambient temperature: minimum 10°C (50°F) – optimal between 12 and 25°C (54 and 77°F).
    Relative humidity: maximum 80%
    Dew point > 3°C (5°F)
    Screeds may not contain more than 4% humidity.

    APPLICATION MEANS:

    Brush and roller.
    Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
    Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)

    PREPARATION OF THE SUBSTRATE:

    Woodwork and joinery :

    On tannic or exotic woods, we recommend using RD-Deco Isomat Aqua as a first coat to prevent tannin migration through the paint film

    Concrete floors:

    Using a diamond sanding machine to prepare the surface will allow to increase the mechanical adhesion of the coating.

    In case of new polished concrete floors, the curing compound should be removed first by means of a curing remover or by grid blasting.

    Metallic floors (platforms):

    For applications on metals, a first coat of RD-Monoguard is advised.

    Wooden floors:

    The use of a sanding machine to prepare the surface allow to increase the mechanical adhesion of the coating.

    MIXING RATIO:

    Just before the application, add slowly component B into component A by mixing mechanically. After mixing, let it rest during 5 to 10 minutes so that the air bubbles disappear. The mixture must be used within 2 hours.

    Weight: 270 g of component B for 995 g of component A

    Volume: 3,5:1

    POT-LIFE:

    2 hours at 20°C

    DILUTION:

    Dilute the first coat by maximum 10% with water when applied as primer on a porous substrate.

    DRYING TIME (20°C - 68°F):

    Touch dry: 6 hours
    Recoatable: min. 8 hours and maximum 72h without sanding
    Resistance to moderate use: 3 days
    Resistance to intensive use: 7 days

    CLEANING OF TOOLS:

    Water

    SPECIFICITIES:

    Mix well before use.

    Technical data

    FINISH (Gardner 60°):

    Satin: 35 % +/- 10    

    COLOURS:

    White, RAL, NCS and bespoke colours.
    Available on RD Coatings dispensing system

    DENSITY:

    1.25 +/- 0.05 g/cm³

    SOLIDS CONTENT:

    In weight: 59% +/-2
    In volume: 49% +/-2

    VISCOSITY:

    15 - 25 P (Brookfield 20RPM)

    VOC CONTENT:

    < 20 g/l

    FLASH POINT:

    Not flammable

    STORAGE:

    24 months, keep away from frost and store away from heat.

    Norms and tests

    ABRASION RESISTANCE TABER

    ASTM D4060

    OVERALL MIGRATION

    EN 1186

    QUV

    ASTM D4587 / ASTM G53 /ISO11507

    CORROSION

    ASTM B117 / ISO 9227

    PENCIL HARDNESS

    ISO 15184

    PERSOZ HARDNESS

    ISO 1522

    CHEMICAL RESISTANCE

    INTERNAL TESTS

    ADHERENCE CROSS CUT

    ISO 2409

    ISO 16000-6 / VOC Classification in France

    Safety data

    The new REACH restriction requires workers handling diisocyanates to undergo training according to their uses. The regulations define 3 levels of training, basic training (level I), intermediate training (level II) and advanced training (level III). The training content has been developed by experts in the field of EHS.

    This guide helps you choose the right training. Click here for trainings and guide. Or visit https://www.safeusediisocyanates.eu/

    Attention: If you have only chosen the basic training, please note that the advanced training and refresher training mentioned in the REACH restriction in paragraph 74 of annex XVII are not included. In all training courses, the basic training is already included and therefore does not have to be chosen additionally. To register a group of participants, please use an administrative account.

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS. S061/230217

    Related products

    Fast drying Primer/Finish high performance anti-corrosion coating with universal adherence.

    From €38.01
    View