Home 
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-Monovar PU Satin
Go totechnical sheet
High performance interior and exterior satin varnish with superior properties.
This multi-purpose varnish is perfectly suited to protect and strengthen the resistance of surfaces against wear and weathering, including floors. Water-based, one-component, and quick-drying, RD-Monovar PU is easy to use and can be applied to most surfaces or types of paints.
From 33,31 € / L VAT incl.
We deliver worldwide. Online sales are available for Benelux and France; shipping costs are calculated in the shopping cart. For all other destinations, please ask us for a quote.Technical sheet RD-Monovar PU Satin
Download technical sheetDescription of the product
USE:
High performance interior and exterior varnish with superior properties.
FEATURES:
RD-Monovar PU is a single-component varnish based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes including floors.
RD-Monovar PU is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Monovar PU creates a nice and smooth finish. Thanks to its high-quality pigments and resins, it has a very good resistance against humidity, water and has a very good outdoor durability. It can cover most kind of existing coatings to strengthen the film surface and further protect against dirt, pollution, weathering and UVs. It can be used on walls in humid rooms of technical rooms like kitchens or bathrooms to obtain a tighter finish, easier to clean, and more resistant to humidity or stains.
RD-Monovar PU has successfully been tested to be used for constructions regulated by the LIVING BUILDING CHALLENGE – LEED.
SUBSTRATES:
Various plastics, concrete, cement, wood, metal (with primer), coated surfaces, …
Systems
Wood, concrete, plaster, cement, hard plastics: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Monovar PU Satin | 110 / 4,5 | 30 / 1,2 | 0,11 L / 367 |
Finish | RD-Monovar PU Satin | 110 / 4,5 | 30 / 1,2 | 0,11 L / 367 |
TOTAL | 60 / 2,4 | 0,22 / 184 | ||
Ferrous metals – light to moderate corrosive conditions: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Monoguard Clear | 230 / 9 | 80 / 3,2 | 0,23 L / 178 |
Finish | RD-Monovar PU Satin | 150 / 6 | 40 / 1,6 | 0,15 L / 275 |
TOTAL | 120 / 4,8 | |||
Non-ferrous metals – (stainless steel, aluminium, …): | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Primer | RD-Multiprim | 100 / 4 | 40 / 1,6 | 0,10 L / 400 |
Finish | RD-Monovar PU Satin | 150 / 6 | 40 / 1,6 | 0,15 L / 275 |
TOTAL | 80 / 3,2 | |||
On top of existing coatings: | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | |
Finish | RD-Monovar PU Satin | 150 / 6 | 40 / 1,6 | 0,15 L / 275 |
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Application instructions
APPLICATION CONDITIONS:
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
APPLICATION MEANS:
Brush, roller or spray gun.
Compressed air: nozzle opening 1,4 mm – 4 to 6 bars of pressure (60 to 90 psi)
Airless: nozzle opening 007 to 009 – Pressure +/- 70 bars (+/- 1000 psi)
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the kind of substrate. In general, the surface must always be cleaned and degreased prior to applying RD-Monovar PU.
DILUTION:
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
SPECIFICITIES:
Mix well before use.
Technical data
FINISH (Gardner 60°):
Satin: 25 +/- 10
COLOURS:
Clear/transparent.
DENSITY:
1.05 +/- 0.05 g/cm³
SOLIDS CONTENT:
In weight: 30 % +/-2
In volume: 27 % +/-2
VISCOSITY:
20 - 30 P (Brookfield 20RPM)
VOC CONTENT:
< 50 g/L
FLASH POINT:
Not flammable
STORAGE:
Minimum 24 months protected from frost and excessive temperatures in its original closed packaging.
Norms and tests
RED LIST COMPLIANCE | Living Building Challenge v3 |
VOC EMISSION TEST RESULTS | California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 |
TVOC CONCENTRATION RANGE | USGBC’s LEED v4 rating systems |
USGBC LEED Version 4, BD&C, ID&C | |
The WELL Building Standard | |
ANSI/GBI 01, Green Building Assessment Protocol | |
PERSOZ HARDNESS | ISO 1522 |
TABER ABRASION | ISO 7784-1 |
ADHERENCE CROSS CUT | ISO 2409 |
PENCIL HARDNESS | ISO 15184 |
 | ISO 16000-6 / COV classification in France |
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
VERS. W023/230217
High performance interior and exterior satin varnish with superior properties.