- Delivery 48h
- Secure payments
- ISO 9001 Certification
Description of the product
Reinforcement mesh used in waterproofing systems for roofs, decks and screeds.
RD-Roof Fleece is a polyester micro-perforated mesh used to reinforce waterproofing systems and ensure the durability of the film, especially on metallic roofs, asphalt and bitumen membranes, decks and screeds needing to contain accidental liquid spills. It has excellent cracks bridging abilities with good resistance to UV, acids, and alkali.
RD-Roof Fleece is available in different sizes to better fit the needs.
Concrete, cement, bricks, plaster, coated surfaces, etc.
Flat roofs and slopes < 4% in rainy temperate and continental climate.
Wet film thickness in microns / mils
Dry film thickness in microns / mils
Consumption per m² / ft² per gallon
The Fleece is unrolled on the roof prior to applying the coating.
320 / 13
175 / 7
0,40 Kg / 128
1270 / 51
705 / 28
1,60 Kg / 32
880 / 35
2 Kg / 25
Check datasheet of RD-Elastodeck or RD-Elastometal for further information.
Indicated consumption is theoretical and does not consider potential losses during application. It can also be influenced by the porosity of the substrate.
Unroll and cut the fleece to the desired dimension and lay it on the surface. Roll or brush a first layer of RD-Elastodeck or RD-Elastometal through the mesh. Ensure an overlap of 5 cm / 2 inches between each line of fleece.
100 % polyester
43 - 44 g/m²
Length: 100 m
Width: 120 cm - 60 cm - 20 cm
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.