Delivery 48h 
Secure payments 
ISO 9001 Certification Waterborne one component transparent impregnation primer for porous and powdering surfaces.
Waterborne one component transparent impregnation primer for porous and powdering surfaces.
RD-Unifix is based on acrylic resins dispersed in water. It is used as an impregnation layer on porous substrates to fix and seal the surface prior to applying subsequent coating systems such as decorative or functional waterborne coatings.
RD-Unifix is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Unifix has excellent fixing properties and the very small dispersed particles allows a better penetration of the substrate.
Porous substrates such as bricks, concrete, plaster, and derivatives.
Apply +/- 0,10 L per m² prior to the following coating system. This quantity may change depending on the absorption rate of the substrate. RD-Unifix will penetrate the surface and leave a glossy finish.
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Brush, roller, pump sprayer or airless (nozzle 011 – 015).
Apply until saturation.
The surface must be cleaned, degreased and free of dust.
Product is ready-for-use.
Touch dry: +/- 1 hour
Recoatable: +/- 4 hours
Water
Mix well before use.
Glossy
Colourless.
1.02 +/- 0.05 g/cm³
In weight: 15 % +/-2
In volume: 15 % +/-2
10 – 20 sec. (Ford Cup 4 – 23°C / 73°F)
0 g/L
Not flammable
24 months, keep away from frost and store away from heat.
 | ISO 16000-6 / VOC Classification in France |
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
Breathable waterproofing and protection coating for walls and facades with structured effect.
Waterborne acrylic onecomponent flat paint, for outdoor walls. Vapour permeable and waterproof....
Waterborne one component acrylic paint with soft finish, for outdoor walls. Vapour permeable and...
Breathable waterproofing system for concrete, walls and façades; protects against weathering,...
Waterborne one component transparent impregnation primer for porous and powdering surfaces.
Home