• Delivery 48h Delivery 48h
    • Secure payments Secure payments
    • ISO 9001 Certification ISO 9001 Certification

    RD-Aquasorb

    Technical sheet

    Single-component water-based anti-condensation paint. Absorbs then releases moisture when the air becomes dry again.

    RD-Aquasorb is based on a styrenated acrylic dispersion. The coating is applied in rooms subject to regular condensation on ceilings and walls. It helps to prevent the growth of mold, watermarks, or drops and runoffs.

    From €92.02 VAT incl.

    Available colors

    Click here to chose your color
    RAL 1000 Lorem Ipsum

    Packaging

    5 l
    €92.02 VAT incl.
    Price per L: €18.40 VAT incl., surface 1 coat: 11.11m²
    20 l
    €325.97 VAT incl.
    Price per L: €16.30 VAT incl., surface 1 coat: 44.44m²
    Total VAT incl. : 0
    Total quantity selected (L): 0
    Average price VAT incl. per L: 0
    Theoretical surface that can be painted in 2 coats with the ordered quantity (*) : 0

    (*) the quantity indicated is theoretical and is based on a standard consumption of the product as described in the technical sheet below. This consumption is also influenced by the nature of the support and the method of application.

    Technical sheet

    Description of the product

    USE:

    Single-component water-based anti-condensation paint. Absorbs then releases moisture when the air becomes dry again.

    FEATURES:

    RD-Aquasorb is based on a styrenated acrylic dispersion. The coating is applied in rooms subject to regular condensation on ceilings and walls. It helps to prevent the growth of mold, watermarks, or drops and runoffs.

    RD-Aquasorb will absorb water from condensation in the room that will later be released as vapour once the room is ventilated, and the humidity level becomes lower.  

    It can therefore not be overpainted or applied in rooms that are permanently wet!

    RD-Aquasorb is suitable to be used in various situations where there is regular condensation and high humidity like in the food industries: breweries, dairy factories, meat and fish processing, … - bathrooms, kitchens, … - buildings, technical rooms with condensation problems …

    RD-Aquasorb can be applied on many kinds of surface including steel when used with the appropriate primer.

    SUBSTRATES:

    Concrete, plaster, steel, plastics, … with the appropriate primer

    Systems

    SELECTION OF PRIMER

     

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Porous mineral surfaces

     

     

     

     

    Primer

    RD-Unifix

     

     

    0,10 L / 400

    Depends on absorption

    Metal surfaces, weathered galvanized steel

     

     

     

     

    Primer

    RD-Elastometal

    300 / 12

    175 / 6

    0,4 Kg / 130

     

    Aluminium, stainless steel, fresh galvanized steel

     

     

     

     

    Primer

    RD-Monoguard

    210 / 8,5

    90 / 3,5

    0,2 L / 190

     

    RD-AQUASORB

     

    Wet film thickness in microns / mils

    Dry film thickness in microns / mils

    Consumption per m² / ft² per gallon

    Comments

    Recommended application by brush or roller

     

     

     

     

    First coat

    RD-Aquasorb

    445 / 18

    125 / 5

    0,45 L / 90

    The minimum thickness per coat should be 90 µ / 3,5 mils dft

    Finish

    RD-Aquasorb

    445 / 18

    125 / 5

    0,45 L / 90

    TOTAL

     

    250 / 10

    0,92 L / 45

    Recommended application by airless

     

     

     

     

    First coat / Finish

    RD-Aquasorb

    1000 / 40

    280 / 11

    1 L / 40

     

    TOTAL

     

    280 / 11

    1 L / 40



    Indicated consumption is theoretical and does not consider potential losses during application.

    It can also be influenced by the porosity of the substrate.

    Application instructions

    APPLICATION CONDITIONS:

    Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F). Do not paint under direct heavy sunlight.
    Relative humidity: maximum 80 %
    Surface temperature must be minimum 3°C (5°F) above dew point.

    APPLICATION MEANS:

    Brush
    Roller: polyamide 10-15 mm
    Airless: pressure between 130 bar / 1900 psi and 200 bar / 2900 psi. Nozzle size: 018 – 024

    PREPARATION OF THE SUBSTRATE:

    The surface must be clean, dust-free, and dry.
    Check the technical sheet of the chosen primer for further information.
    In case of mold or mosses on the surface, remove it with a special anti-moss product and rinse properly.

    DILUTION:

    Product is ready-for-use. 

    DRYING TIME:  (20°C – 68°F)

    Touch dry (dust free): +/- 1 hour
    Recoatable: +/- 4 hours
    Dry: +/- 4 hours 

    CLEANING OF TOOLS:

    Water.

    SPECIFICITIES:

    Mix well before use. 

    Technical data

    FINISH:

    Mat

    COLOURS:

    White.

    DENSITY: 

    Ca. 1,20 +/- 0,05 g/cm³

    SOLIDS CONTENT:

    In weight: 39 %
    In volume: 28 %

    VISCOSITY: 

    125P +/-25 (Brookfield 20RPM)

    VOC CONTENT:

    < 105 g/L

    FLASH POINT: 

    Not flammable.

    STORAGE STABILITY: 

    Minimum 24 months protected from frost and excessive temperatures in its original closed packaging.

    Norms and tests

    WATER ABSORPTION

    INTERNAL TESTS

    ISO 16000-6 / VOC Classification in France

    Safety data

    Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.

    These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.

    VERS.   WI11/230318