Home 
Delivery 48h 
Secure payments 
Technical & commercial support
Calculate here the amount of paint needed for your project
RD-GlassBeads
Go totechnical sheet
Glass microspheres used to make floors non-slip or to give a reflective appearance to road paints.
RD-GlassBeads are round, unbreakable glass microspheres designed to enhance the reflective values of road markings. They improve visibility and grip on these surfaces.
RD-GlassBeads are also used in floor paints to increase anti-slip properties when floors are likely to become wet.
From 4,09 € / Kg VAT incl.
We deliver worldwide. Online sales are available for Benelux and France; shipping costs are calculated in the shopping cart. For all other destinations, please ask us for a quote.Technical sheet RD-GlassBeads
Download technical sheetDescription
USE :
Glass microspheres used to make floors non-slip or to give a reflective appearance to road paints.
FEATURES :
RD-GlassBeads are round, unbreakable glass microspheres designed to enhance the reflective values of road markings. They improve visibility and grip on these surfaces.
RD-GlassBeads are also used in floor paints to increase anti-slip properties when floors are likely to become wet.
SUBSTRATES :
To be applied directly onto a wet paint film from the RD Coatings floor range.
Systems
Anti-slip system for floors.
Application of RD-GlassBeads with a floor paint system from RD Coatings
| Quantity | Result |
| Light sprinkling: 0.30 kg/m² before brushings. | Medium anti-slip effect. |
| Full coverage: 0.85 kg/m² before brushing. | Strong anti-slip effect. |
| Mixed into the paint: 250 g per liter or 175 g per kg. | Medium to high anti-slip properties. |
Reflective system for road paints.
- Beaded/Reflective Effect :
Sprinkle glass beads at a rate of 300 g/m² onto the wet paint. - Sandwich System :
Apply 300 g/m² of RD-AquaRoad and gradually sprinkle glass beads at a rate of 300 g/m².
Then apply another layer of 300 g/m² of RD-AquaRoad.
- Multi-layer System :
Apply 300 g/m² of RD-AquaRoad and gradually sprinkle glass beads at a rate of 300 g/m².
Then apply another layer of 300 g/m² of RD-AquaRoad and sprinkle the beads again with a coverage of 300 g/m².
Application instructions
Refer to the technical data sheet of the chosen coating for details regarding surface preparation, application conditions, dilution, etc.
Spraying :
The beads are manually projected by hand or with a low-pressure sprayer.
Application with a sprayer: Use a nozzle with an opening of at least 18 mm; air pressure 1 to 3 bars.
Mixing into the paint (anti-slip system) :
Add RD-GlassBeads directly into the paint before application.
Mix mechanically for a few minutes.
Technical data
CONFORMITY
COMPLIANT with STANDARD EN 1423
SPHERICITY
≥ 80%
REFRACTIVE INDEX
Class A (≥ 1.5)
HAZARDOUS SUBSTANCES
Class 1 (As/Pb/Sb ≤ 200 ppm)
TRUE DENSITY
2.5
SHELF LIFE
Unlimited
Safety data
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
Contact your RD Coatings representative for any further information.
VERS. D045/241024
Glass microspheres used to make floors non-slip or to give a reflective appearance to road paints.