- Delivery 48h
- Secure payments
- ISO 9001 Certification
Calculate here the amount of paint needed for your project
Description of the product
Waterborne onecomponent acrylic paint, for inner walls and roofs. Very appropriate for renovation and for insulation of substrates with nicotine or old humidity spots.
RD-Deco Isomat Aqua is also suitable as a primer on tannic and exotic woods. It will block the rise of tannin in the paint film.
High covering capacity.
Uniform flat aspect.
Plaster, gyproc, bricks, concrete, old paints, cement.
On walls and ceilings:
1 or 2 coats of RD-Deco Isomat Aqua to be applied directly on a clean and degreased surface.
As a second coat, you can apply one of our VOC-free paints for interior decoration: Ecomat. Ecosatin or Ecosoft.
On tannic or exotic woods:
1 coat of RD-Deco Isomat Aqua to be applied directly on a clean surface.
Ambient temperature: minimum 5° C (41°F) – Optimal between 12° and 25°C (54° and 77°F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3°C (5°F) above dew point.
Brush, roller or airless (nozzle: 013–015)
PREPARATION OF THE SUBSTRATE:
The substrate has to be dry, cleaned, degreased and free of dust
Product is ready-for-use.
DRYING TIME (20°C - 68°F):
Touch dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Mix well before use.
FINISH (Gardner 60°):
1.37 +/- 0.05 g/cm³
In weight: 60 % +/-2
In volume: 48 % +/-2
90 P (Brookfield 20RPM)
< 30 g/L
24 months, keep away from frost and store away from heat.
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.